No Light Fixture Option - Casablanca Nouvelle Owner's Manual

N
FINGER SCREW
(3 PER SHADE)
Step 16. Install three finger
screws into each light fitter.
Turn only once or twice.
Step 17. Position the shade
fully in the fitter and tighten
each finger screw two turns
each in rotation until the
shade is centered in the fit-
ter. Check that the shade is
captured by the finger screws
by lightly pulling on the
shade.
Hand tighten the finger
screws securely.
Repeat for each shade.
Step 18. Install the light
bulbs. Replace bulbs only
with the exact type and watt-
age.
Note: Check the finger screws peri-
odically as they will loosen and cause
operating noise.
THIS COMPLETES YOUR INSTALLATION. FOR OPERATIONAL CONTROLS, PLEASE SEE PAGE 12.
NO LIGHT FIXTURE OPTION - FIXTURE REMOVAL
Step 19. Remove the locknut
securing the light fixture to
the lower switch housing.
Save locknut and fixture for
future use.
LIGHT
FIXTURE
10
™
OUVELLE
LIGHT SHADE & BULB HARDWARE
LIGHT SHADE & BULB INSTALLATION
FINGER SCREW
(3 PER SHADE)
LOCKNUT
LOWER
SWITCH
HOUSING
LIGHT
SHADE
60 WATT BULB