Table of Contents
Advertisement
NO LIGHT FIXTURE OPTION - HARDWARE
NO LIGHT FIXTURE OPTION - HARDWARE ASSEMBLY
Step 20. Line up the center
holes of the cap and lower
switch housing to allow the
threaded button to be installed.
Hand tighten securely
NO LIGHT FIXTURE OPTION - INSTALLATION HARDWARE
NO LIGHT FIXTURE OPTION - INSTALLATION
Step 21. Align the three holes
in the side of the fixture with
the three threaded holes in
the adaptor ring and install
the three (3) 6-32 X
5
/
16
Phillips screws.
Hand tighten securely.
LIGHT FIXTURE
SCREW
N
OUVELLE
LOWER SWITCH
HOUSING CAP
LOWER SWITCH
HOUSING
LOWER SWITCH
HOUSING CAP
LIGHT FIXTURE SCREW
PHILLIPS COUNTERSUNK
6-32 X
5
(3)
/
16
™
THREADED BUTTON
THREADED
BUTTON
11
Advertisement
Table of Contents
