Casablanca Nouvelle Owner's Manual page 9

N
BLADE HOLDER
Step 10. Attach the blades
to the blade holders with
four of the flat head 10-24
9
X blade screws and #10
/
16
felt washers provided.
Hand tighten securely.
Step 11. Attach each blade/
blade holder assembly to the
flywheel.
Tighten securely by hand
only.
4/5 Blade Combination Flywheel
Your Casablanca fan includes our 4/5 combination fly-
wheel. This flywheel accommodates your preference to
use either 4 or 5 blades on your fan. If you desire a 4-
blade fan, locate the square counterbores on the fly-
wheel and use these threaded holes to mount the blades.
If you desire a 5-blade fan, locate the round counterbores
on the flywheel and use these threaded holes.
= 4-blade mounting hole
8
™
OUVELLE
BLADE HOLDERS & HARDWARE
COUNTERSUNK PHILLIPS
12-24 X
BLADE & BLADE HOLDER INSTALLATION
= 5-blade mounting hole
BLADE HOLDER SCREW
(2 PER BLADE)
5
/
8
BLADE HOLDER SCREW
(2 PER BLADE HOLDER)
BLADE SCREW
FLAT HEAD
10-24 X (4 PER BLADE)
7
/
16
FELT WASHER
#10 (4 PER BLADE)
BLADE SCREW
(4 PER BLADE)
FELT WASHER
(4 PER BLADE)