Installing Using Plug And Play On Windows Me - Konica Minolta bizhub 181 User Manual

Installing the printer driver
1
Check the contents of the Found New Hardware Wizard, and then click
the [Next] button.
2
Select "Search for a suitable driver for my device [recommended]" and
then click the [Next] button.
3
Select "Specify a location" and then click the [Next] button.
4
Specify the following folder on the CD-ROM as the location where the
driver is saved.
– Folder to be specified: \Driver\WIN2K_XP\English
– The folder can be selected after clicking the [Browse] button.
5
Click the [Next] button.
– When the Microsoft digital signature warning message appears,
click the [Yes] button.
The Completing Found New Hardware Wizard dialog box appears.
6
Click the [Finish] button.
This completes the installation of the TWAIN driver.
The Found New Hardware Wizard appears again, and the installation
of the printer driver begins.
7
Repeat steps 1 through 6 to install the printer driver.

Installing using Plug and Play on Windows Me

Note
If the driver is installed using Plug and Play, first the TWAIN driver for
scanning is installed, next the USB printing support driver is installed, and
then installation of the printer driver begins. The procedure described in
this manual is for the installation of the TWAIN driver, the USB printing
support driver, then the printer driver. For details on the TWAIN driver, re-
fer to the User's Guide for the TWAIN driver.
Follow the instructions that appear in the Add New Hardware Wizard to com-
plete the installation.
1
Select "Specify the location of the driver (Advanced)" and then click the
[Next] button.
2
Select "Specify a location" and then specify the following folder on the
CD-ROM as the location where the driver is saved.
GDI Printer Controller
2
2-11