Scanning Using The Mp Toolbox - Canon MultiPASS MP390 User Manual

Scanning Using The MP Toolbox

MP Toolbox contains buttons for scanning documents to your computer and processing and saving
them. For details on using the MP Toolbox, see Software Guide, located on your Setup CD-ROM.
Follow this procedure:
1
Load the document on the platen glass. (See page 19)
2
On the Windows desktop, double-click [Canon MP Toolbox 4.1].
Or, click [Start] on the taskbar, point to [(All) Programs], [Canon], and [MP Toolbox 4.1], then click
[Toolbox 4.1].
The MP Toolbox opens.
3
Click the MP Toolbox button to be used.
Save-1
Save-2
File
Scan-1
Scan-2
Mail
OCR
Settings
When the utility software on the Setup CD-ROM are installed, one part will be registered in the
MP Toolbox buttons.
[OCR] button
[Scan-1] button
Chapter 8
The document is scanned in black & white, and saved.
The document is scanned in color, and saved.
The document is scanned, and stored as a PDF file.
The document is scanned, and displayed in a registered application
software.
The document is scanned, and displayed in a registered application
software.
The document is scanned, and the image is attached to an e-mail using an
e-mail application software.
The document is scanned, and converted to text data by an OCR (Optical
Character Recognition) application software.
When a scanner other than this machine is connected to the computer, this
button will enable you to select which scanner to use. Also, you can
change the correspondence between the MP Toolbox buttons and the
[Black] and [Color] keys.
ScanSoft OmniPage SE
ArcSoft PhotoStudio
79
Scanning