Setting The Receive Mode; Canceling Receiving - Canon MultiPASS MP390 User Manual

Canon multipass mp390: users guide
Hide thumbs Also See for MultiPASS MP390:
Table of Contents

Advertisement

Setting The Receive Mode

Follow this procedure:
1
Press [Additional Functions].
2
Press [Set] twice.
Ex:
RECEIVE MODE
3
Use [ ] or [ ] to select the receive mode.
– <FAX/TEL AUTO SW>:
– <FAX ONLY MODE>:
– <DRPD>:
– <MANUAL MODE>:
– <ANS.MACHINE MODE>: Set for the answering machine connected to your machine to
4
Press [Set].
The receive mode will be displayed on the bottom left of the LCD.
Ex:
12/04/2003 THU 15:30
FaxTel
Receive mode

Canceling Receiving

Press [Stop/Reset] and follow any instructions on the LCD.
Chapter 11
FAX/TEL AUTO SW
Set to automatically switch between fax and voice calls. Faxes
will be received automatically, and the machine will ring for
voice calls. (If you connected a telephone to your machine, the
telephone will not ring.)
Set to automatically receive faxes only. (If you connected a
telephone to your machine, the telephone will not ring.)
Set if you have subscribed to a Distinctive Ring Pattern
Detection (DRPD) service offered by some companies.
Set for the machine to ring for fax and voice calls. Fax calls
must be answered manually.
respond to an incoming call first, and then to receive faxes
automatically.
STANDARD
Receiving Faxes
107

Advertisement

Table of Contents
loading

Table of Contents