Canon MultiPASS MP390 User Manual page 55

10
Move the paper thickness lever
left .
11
Load the Photo Index Sheet on the platen
glass.
When loading the Photo Index Sheet, place the front
side down, and align the upper left corner of the
sheet with the alignment mark on the lower right
corner of the platen glass.
CAUTION
Be sure to load the Photo Index Sheet in the correct orientation on the platen glass.
12
Press [Photo Index Sheet].
13
Use [ ] or [ ] to select <SCAN>.
[PHOTO INDEX SHEET]
PRINT
14
Press [Set].
The machine reads the Photo Index Sheet, and prints photographs according to
the settings.
IMPORTANT
• If the LCD displays <SCANNING ERROR>, press [Set] and ensure that a circle is filled for
each setting item.
• If the filled circles on the Photo Index Sheet are not dark enough, the machine may not
read the settings.
• Do not remove the memory card while the machine is printing.
• If the platen glass is dirty, the machine may not read the settings.
NOTE
• To cancel printing, press [Stop/Reset].
• To continue to print photographs using the subsequent Photo Index Sheets, repeat steps 8 to 14.
Chapter 4
to the
< SCAN >
Photo Printing From A Memory Card
1
A
53