How To Use Directory Dialing; Dialing The Number Using Directory Dialing; Redialing A Busy Number; Manual Redialing - Canon MultiPASS MP390 User Manual

How To Use Directory Dialing

You can dial the number easily when the recipient's fax/telephone numbers are registered in the
directory.
NOTE
<NO DATA> appears on the LCD if no fax/telephone number is registered in the directory. For details on
registering directory dialing, see page 87.

Dialing The Number Using Directory Dialing

Follow this procedure:
1
Press [Directory].
2
Use [ ] or [ ] to select the number registered in the directory (01-40).
NOTE
For details on memory sending, see page 98.

Redialing A Busy Number

There are two methods of redialing: Manual redialing and Automatic redialing.

Manual Redialing

To manually redial the last dialed number, press [Redial/Pause].
NOTE
• For details on memory sending, see page 98.
• To cancel manual redialing, press [Stop/Reset].

Automatic Redialing

When using memory sending to send a document and the recipient's line is busy, your machine will
redial the number after a specified interval.
NOTE
• Your machine enables you to customize automatic redialing settings to suit your needs.
• To cancel automatic redialing, wait until the machine starts redialing, then press [Stop/Reset]. Follow the
instructions on the LCD.
• You can also delete the document from memory. For details, see page 100.
Customizing Automatic Redialing Settings
You can customize the following settings:
• Whether or not your machine redials automatically
• The number of times the machine redials (1 to 10 times)
• The time interval between redialings (2 to 99 minutes)
NOTE
For details on the redialing settings, see page 154.
Chapter 10 Sending Faxes
99