Canon MultiPASS MP390 User Manual page 157

Name
TX REPORT
REPORT WITH TX
IMAGE
Menu: RX SETTINGS
Name
ECM RX
FAX/TEL AUTO SW
RING START TIME Selects the time the machine takes to check
F/T RING TIME
F/T SWITCH
ACTION
DRPD:SELECT FAX
INCOMING RING
RING COUNT
MAN/AUTO SWITCH
F/T RING TIME
REMOTE RX
REMOTE RX ID
Chapter 14
Description
Enables/disables automatic printing of a
transmission report after sending.
If you select <PRINT ERROR ONLY> or
<OUTPUT YES>, selects whether the first page of
the fax is printed under the report (black & white
faxes only).
Description
Enables/disables Error Correction Mode (ECM)
during reception.
If you select <FAX/TEL AUTO SW> as the
receive mode, customizes its settings.
whether a call is a fax or voice call.
Selects the ring length for voice calls.
Selects whether the machine switches to receive
mode after the ring time has elapsed, or whether it
disconnects the call.
If you select <DRPD> as the receive mode, select
the ring pattern for the machine.
If you select <FAX/TEL AUTO SW>, <DRPD> or
<FAX ONLY MODE> as the receive mode,
enables/disables ringing for fax calls. (A telephone
must be connected to your machine for ringing to
occur.)
If you select <ON>, selects the number of rings for
fax calls.
If you select <MANUAL MODE> as the receive
mode, selects whether the machine switches to fax
receive mode after ringing for a specified length of
time.
If you select <ON>, selects the length of time the
machine rings before switching to fax receive
mode.
Enables/disables remote receiving.
If you select <ON>, selects the remote receiving
ID.
Settings
PRINT ERROR ONLY
OUTPUT YES
OUTPUT NO
ON
OFF
Settings
ON
OFF
—
0 to 30SEC (8SEC)
10 to 45SEC
(15SEC)
RECEIVE
DISCONNECT
DOUBLE RING
SHORT-SHORT-LONG
SHORT-LONG-SHORT
OTHER RING TYPE
NORMAL RING
OFF
ON
1 to 99TIMES
(2TIMES)
OFF
ON
5 to 99SEC
(15SEC)
ON
OFF
00 to 99
(25)
Appendix
Details
—
Details
page 103
—
—
—
—
—
155