1. Manuals
  2. Brands
  3. Canon Manuals
  4. All in One Printer
  5. MultiPASS MP360
  6. Install manual

Canon MultiPASS MP360 Install Manual

Canon multipass mp360: install guide
Hide thumbs Also See for MultiPASS MP360:
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual, User Manual
READ THIS SHEET FIRST
READ THIS SHEET FIRST
Thank you for purchasing the Canon MultiPASS MP370/360. To prepare your
machine for use, please follow the instructions in this Set-Up Sheet before referring to
any other documentation.
IMPORTANT
Setup flow
This side explains the setup procedure for use without connecting to a computer. <Check packed contents, install and adjust machine>
Setup procedures
Start
You can use the copy, photo print (MP370) functions.
This side explains the setup procedure for use by connecting to a computer. <Install MP Drivers and Utility Software>
Setup procedures
You can use the print, scan functions.
Unpack and install the machine.
1
Carefully remove all items from the box.
NOTE
• When removing the machine from the
box, take sufficient care not to drop it.
3
Place the machine on a flat surface.
• Be sure to hold the machine by the
sides. Set nothing in front of the
machine.
Set-Up Sheet
Set-Up Sheet
Do not connect the USB cable until
cable."
Unpack and install
Connect power
the machine
cord
Install MP Drivers
Hold the bottom side.
Install print head
Install ink tanks
Connect USB cable
2
Remove the protective material.
NOTE
• After removing the protective material,
do not lift the machine by grasping the
scan unit.
4
Remove all shipping tape from the
exterior of the machine.
• After removing the tape, remove the
protective sheet.
HT3-2142-000-V.1.0
, "Connect the USB
Load print media
Align print head
End
Install Utility Software
Do not grasp the
scan unit.

Advertisement

Table of Contents
loading

Related Manuals for Canon MultiPASS MP360

Summary of Contents for Canon MultiPASS MP360

  • Page 1 Set-Up Sheet READ THIS SHEET FIRST READ THIS SHEET FIRST Thank you for purchasing the Canon MultiPASS MP370/360. To prepare your machine for use, please follow the instructions in this Set-Up Sheet before referring to any other documentation. Do not connect the USB cable until IMPORTANT cable."...

  • Page 2: Connect The Power Cord

    Check the contents. • MP370 • MP360 • Power cord • Set-Up Sheet • User's Guide • Setup CD-ROM NOTE • In this sheet, illustrations of MP370 are shown. • A printer cable is not included. You must purchase a USB cable (less than 16 to connect your machine to a computer.

  • Page 3: Install The Print Head

    Install the print head. Lift the scan unit until it locks into place. • If a protective sheet is on the inner side of the scan unit, remove the protective sheet. Lift the scan unit. If the paper output tray does not open, press the Open button to open the paper output tray.

  • Page 4: Install The Ink Tanks

    Install the ink tanks. Prepare the ink tanks. Black Remove the protective Do not touch! cap and dispose of it. Close the inner cover the scan unit w. Click Lower it into place. Swing it upward into place. Load the print media. Open the multi-purpose tray.
  • Page 5 Align the print head from the operation panel. Be sure to align the position of the print head to ensure quality printing. Print the print head position pattern. This message appears. If this message does not appear after closing the scan unit, see page 86 of the User's Guide.
  • Page 6 Install the MP Drivers. The MP Drivers must be installed on the hard disk of your computer in order to print from or scan images to the computer. In addition to installing the MP Drivers, install the MP Toolbox. Use the MP Toolbox to attach scanned images to e-mail and store them.
  • Page 7 1 Install the MP Drivers. (Use when printing from PC applications or scanning images.) Follow the on-screen instructions to install the software. Click 2 Install the MP Toolbox. (Use to scan documents and send as e-mail or save as PDF files.) Follow the on-screen instructions to install the software.

  • Page 8: Connect The Usb Cable

    When installation of the MP Drivers completes, the icon appears on the desktop. You can register your machine online by double-clicking this icon. Canon, MultiPASS, and BCI are trademarks of Canon Inc. All other products and brand names are registered trademarks or trademarks of their respective owners.

This manual is also suitable for:

Multipass mp370

Table of Contents