Checking The Ink Level - Canon MultiPASS MP390 User Manual

3
Press [Set].
INK VOLUME
1.LOW INK WARNING
4
Use [ ] or [ ] to select <2.INK COUNT RESET>.
INK VOLUME
2.INK COUNT RESET
5
Press [Set].
The LCD displays a message asking if you replaced the black ink tank.
BLACK INK CHANGED?
- YES
NOTE
Do not press any keys other than [ ] or [ ].
6
If you replaced the black ink tank, press [ ]. If you did not, press [ ].
The LCD displays a message asking if you replaced the color ink tank.
COLOR INK CHANGED?
- YES
7
If you replaced the color ink tank, press [ ]. If you did not, press [ ].
The ink counter is now reset.
NOTE
Press [Stop/Reset] to switch the machine to exit.

Checking The Ink Level

If you reset the ink counter when you installed/replaced the ink tanks, you can check the current
ink level of the ink tanks at any time.
To check the current ink level of the ink tanks, press [COPY], [FAX], [SCAN], or [PHOTO
PRINT].
The LCD will display the ink level for approx. three seconds.
Indicates the remaining ink volume at three different levels.
? Indicates the ink counter was not reset after replacing the ink tanks.
NOTE
The LCD will not display the ink level when <LOW INK WARNING> is set to <OFF>. (See page 156)
Chapter 12
NO +
NO +
Ex:
COPY MODE
COL BLK
Maintenance
113