Setting Date Printing - Canon MultiPASS MP390 User Manual

8. Use [ ] or [ ] to enable or disable vivid photo printing.
– OFF: Disables vivid photo printing.
– ON: Enables vivid photo printing.
NOTE
• Printing will take longer when this setting is enabled.
• This cannot be used when <PLAIN PAPER> is selected for the paper type.

Setting Date Printing

Enabling this setting will print the date, recorded by the digital camera, below each thumbnail on
an index or on the bottom right of the photograph
NOTE
You can set date printing in the following printing methods.
– All images (See page 54)
– Index (See page 57)
– Single image (See page 59)
– Range of images (See page 61)
To enable/disable date printing:
Example
1. Press [PHOTO PRINT].
2. Press [Menu] once until <1.PHOTO PRINT MODE> appears.
3. Use [ ] or [ ] to select the printing method, and then press [Set].
4. Use [ ] or [ ] to select the paper size, and then press [Set].
5. Use [ ] or [ ] to select the paper type, and then press [Set].
6. Use [ ] or [ ] to enable or disable borderless printing, and then press [Set].
<PRINT DATE> is displayed on the LCD.
Ex:
4.PRINT DATE
NOTE
The menu number may differ, depending on the photo print settings.
7. Use [ ] or [ ] to enable or disable date printing.
– OFF: Disables date printing.
– ON: Enables date printing.
NOTE
• Printing will take longer when this setting is enabled.
• You cannot set date printing from the machine for DPOF printing. (See page 64)
Chapter 4
OFF
.
Photo Printing From A Memory Card
49