Setting Vivid Photo Printing - Canon MultiPASS MP390 User Manual

To adjust the amount of image that extends off the paper (extension amount):
1. Press [Additional Functions].
2. Use [ ] or [ ] to select <5.EXTENSION AMOUNT>.
USER DATA
5.EXTENSION AMOUNT
3. Press [Set].
Ex:
EXTENSION AMOUNT
4. Use [ ] or [ ] to select the extension amount.
– <SMALL> : Reduces the amount of image that extends off the paper.
– <LARGE> : Enlarges the amount of image that extends off the paper.
5. Press [Set].
6. Press [Stop/Reset] to switch the machine to exit.

Setting Vivid Photo Printing

Enabling this setting will make photographs appear more vibrant, especially blues and greens.
NOTE
You can set vivid photo printing in the following printing methods.
– All images (See page 54)
– Index (See page 57)
– Single image (See page 59)
– Range of images (See page 61)
– DPOF (See page 64)
To enable/disable vivid photo printing:
Example
1. Press [PHOTO PRINT].
2. Press [Menu] once until <1.PHOTO PRINT MODE> appears.
3. Use [ ] or [ ] to select the printing method, and then press [Set].
4. Use [ ] or [ ] to select the paper size, and then press [Set].
5. Use [ ] or [ ] to select the paper type, and then press [Set].
6. Use [ ] or [ ] to enable or disable borderless printing, and then press [Set].
7. Use [ ] or [ ] to select date printing or not, and then press [Set].
<VIVID PHOTO> is displayed on the LCD.
Ex:
6.VIVID PHOTO
NOTE
The menu number may differ, depending on the photo print settings.
48
Photo Printing From A Memory Card
SMALL
OFF
Chapter 4