Setting Date Printing - Canon MultiPASS F20 Basic Manual

Setting date printing

Enabling this setting will print the date, recorded by the digital camera, below each
thumbnail on an index A or on the bottom right of the photograph B.
Enable or disable this setting before printing photographs from a memory card.
NOTE
• Printing will take longer when this setting is enabled.
• You cannot set the date for DPOF printing.
Follow this procedure to enable/disable this setting:
1
Press [Photo Print].
2
Press [Menu] three times.
Ex:
3 . P R I N T P H O T O D A T E
3
Use [2] or [3] to select <ON> to enable date printing or <OFF> to
disable it.
4
Press [Set].
• When date printing is enabled, the LCD will display < >.
8-14
Photo printing from a memory card
O F F
A
B
Chapter 8