Chapter 11 Installation; Choosing An Suitable Installation Location - Canon GP160F Service Manual

I. CHOOSING AN SUITABLE INSTALLATION LOCATION
The conditions relating to the installation location are listed below. It is therefore
advisable to read these conditions prior to the machine being brought into the cus-
tomer's premises.
A. The unit must be connected independently to an electrical outlet which provides the
rated power supply.
B. The ambient temperature must be between 5°C and 35°C, and the humidity must be
between 10 to 90%RH. Please do not place the unit near water faucets, hot-water
heaters, humidifiers or refrigerators.
C. Do not place the unit near a fire source, very dusty location, in a location where
ammonia gas may occur, or in direct sunlight. In situations where placing the unit in
direct sunlight is unavoidable, it is recommended that curtains be hung to protect the
unit.
D. The room should have good ventilation.
E. The legs of the copier should not rise up off the floor. The copier should be kept
level.
F. The machine should be set up at least 10 cm away from the wall, and there should
be enough space to perform maintenance on the machine.
(Please refer to the following page "operation space overview")
COPYRIGHT © 1999 CANON INC.
Download Free Service Manual at http://printer1.blogspot.com
CANON GP160 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)

CHAPTER 11 INSTALLATION

11-1