Loading Print Media; Loading Paper; Loading Envelopes - Canon MultiPASS F60 Comprehensive Manual

Loading print media

Loading paper

Follow this procedure to load paper in the multi-purpose tray:
1
Remove the tray cover.
2
Place a stack of paper (print side up)
in the multi-purpose tray q and
adjust the paper guide
width of the stack w.
• Make sure the stack does not exceed the
paper limit mark B.
3
Replace the tray cover over the multi-
purpose tray.

Loading envelopes

Follow this procedure to load envelopes in the multi-purpose tray:
1
Make sure the paper thickness lever is
set to the right.
• For details, see p. 3-5.
2
Remove the tray cover.
3
Prepare the envelopes for loading:
Press down firmly on the edges of the
envelopes to make the folds crisp. Also,
press firmly on the area that corresponds
to the edges of the back flap.
Remove any curling by holding the edges
diagonally and bending them gently.
Chapter 3
A to the
q
w
A B
Print media handling
3-7