Safety Infomation - Pentair PROSTOP-E Installation And Operation Manual

SAFETY INFORMATION
The ProStop-E rate controller can be used to control and apply
hazardous chemicals. Exposure to hazardous chemicals can
result in illness, severe injury, or death. Hazardous chemicals
include insecticides, pesticides, herbicides, fungicides, and
fertilizers.
Material Safety Data Sheets (MSDS) provide specific details
on chemical products: physical and health hazards, safety
procedures, and emergency response techniques. Ammonia is
an irritant and corrosive to the skin, eyes, respiratory tract and
mucous membranes. Exposure to liquid or rapidly expanding
gases may cause severe chemical burns and frostbite to the
eyes, lungs and skin. Skin and respiratory related diseases could
be aggravated by exposure.
Follow special protection and procedure methods for hazardous
materials, including protective equipment, eye protection,
respiratory protection, and ventilation.
Carefully read and follow all safety instructions in this manual.
Keep safety labels in good condition. Replace missing or
damaged safety labels.
This is the alert symbol. When you see this symbol in this manual,
look for one of the following signal words and be alert to the
potential for personal injury.
WARNING
warns about hazards that will cause serious
personal injury, death or major property damage if ignored.
NOTICE indicates special instructions which are important but
not related to hazards.
HYP1100 (04-08-21)
CALIFORNIA PROPOSITION 65 WARNING This product and
related accessories contain chemicals known to the State of
California to cause cancer, birth defects or other reproductive
harm.
3