Prostop-E Dual - Pentair PROSTOP-E Installation And Operation Manual

PROSTOP-E DUAL

HOME SCREEN
1
2
3
1. Auto/Man Nozzle Control
A button is added to give the user the capability of
automatic nozzle switching or manual nozzle switching.
This button cycles through four different options. When
the button is pressed, the active nozzle changes from
Auto, to A, to B, to A + B, then back to Auto. When in Auto,
the nozzles will switch based off the parameters defined in
ProStop-E Dual Setup. When A, B, or A+B is selected, that
is the active nozzle(s).
2. Ch. 1 Information Display
An information display box is added to display the current
nozzle that is being used.
3. Ch. 1 Information Display
When width is displayed, the label will change to Active
Width rather than Width to give the user numerical
feedback on how many nozzles are turned on.
28
HYP1100 (04-08-21)