Antenna Tuner Control Interface; Configuration Pins - Quectel RM500Q-AE Manual

NOTE
"*" means under development.
3.11.3.13.

Antenna Tuner Control Interface*

ANTCTL[1:2] are used for antenna tuner control and should be routed to an appropriate antenna control
circuit. More details about the interface will be added in the future version of this document.
Table 202019: Pin Definition of Antenna Tuner Control Interface
Pin No. Pin Name
56 RFFE_CLK*
RFFE_CLKDAT
58
A
*
61 ANTCTL1
*
63 ANTCTL2
NOTE
"*" means under development.
3.12.3.14.

Configuration Pins

RM500Q-AE&RM502Q-AE module provides four configuration pins, which are defined as below.
Table 21: Definition of Configuration Pins
Pin No. Pin Name
21 CONFIG_0
RM500Q-AE&RM502Q-AE_Hardware_Design
I/O Description
DO
Used for external MIPI IC
DO
DO
Antenna Control
DO
I/O Power Domain
DO 0
RM500Q-AE&RM502Q-AE Hardware Design
control.
Description
Not connected internally
5G Module Series
DC Characteristics
V max = 0.45 V
OL
V min = 1.35 V
OH
V max = 1.8 V
OH
V max = 0.45 V
OL
V min = 1.35 V
OH
V max = 1.8 V
OH
50 / 83