Functional Diagram - Quectel RM500Q-AE Manual

Temperature Range
Firmware Upgrade
RoHS
NOTES
1)
1. HPUE is only for single carrier.
2)
2. 5G NR FDD bands only support 15 kHz SCS, NR TDD bands only support 30 kHz SCS.
3)
3. The maximum rates are theoretical and the actual values refer to the network configuration.
4)
4. To meet this operating temperature range, you need to ensure effective thermal dissipation, for
example, by adding passive or active heatsinks, heat pipes, vapor chambers, etc. Within this range,
the module can meet 3GPP specifications.
54)
5. Within extended temperature range, the module remains the ability to establish and maintain
functions such as voice, SMS, data transmission without any unrecoverable malfunction. Radio
spectrum and radio network will not be influenced, while one or more specifications, such as P
undergo a reduction in value, exceeding the specified tolerances of 3GPP. When the temperature
returns to the normal operating temperature level, the module will meet 3GPP specifications again.
"*" means under development.
6.
2.2.2.3.

Functional Diagram

The following figure shows a block diagram of RM500Q-AERM500Q-AE&RM502Q-AE.
⚫
Power management
⚫
Baseband
⚫
DDR + NAND flash
⚫
Radio frequency
⚫
M.2 Key-B interface
RM500Q-AE&RM502Q-AE_Hardware_Design
⚫
Operating temperature range: -20 to +60 ° C
⚫
Restricted Operating temperature range: -30 to -20 ° C, +60 to +75 ° C
⚫
Extended temperature range: -40 to -30 ° C, +75 to +85 ° C
⚫
Storage temperature range: -40 to +90° C
⚫
USB 2.0 interface, PCIe interface and DFOTA
⚫
All hardware components are fully compliant with EU RoHS directive
RM500Q-AE&RM502Q-AE Hardware Design
4)
5G Module Series
5)
may
out
17 / 83