Installing The Switch In An Equipment Rack; Guidelines For Installing The Switch In A Rack; Installing The Switch In A Rack - Allied Telesis XS910/8 Manual

XS910/8 Unmanaged Switch Installation and User's Guide

Installing the Switch in an Equipment Rack

Guidelines for
Installing the
Switch in a Rack
Installing the
Switch in a Rack
You can install one AT-XS910/8 switch in a row of the equipment rack or
two AT-XS910/8 switches in one row of the equipment rack as shown in
Figure 13.
Figure 13. Rack Installation Options
Before planning to install the switch on an equipment rack, review the
following guidelines:
To install one AT-XS910/8 switch in an equipment rack, use the

AT-RKMT-J14 rack mount kit.
To install two AT-XS910/8 switches in one plate to an equipment

rack, use the AT-RKMT-J15 rack mount kit.
Note
You must purchase the AT-RKMT-J14 or AT-RKMT-J15 rack mount
kit separately.
You can either one switch or two switches in a row of an equipment rack:
To install one switch on an equipment rack, see "Installation Using

the AT-RKMT-J14 Rack Mount Kit" on page 47.
To install one switch on an equipment rack, see "Installation Using

the AT-RKMT-J15 Rack Mount Kit" on page 51.
36