Naming A Room; Advanced Settings; Changing A Time Zone - Siemens RDS110.R User Manual

6.7.3 Naming a room

6.8 Advanced settings

6.8.1 Changing a time zone

A6V11562455_en--_b
You can give a unique name to a room where your thermostat is installed. Doing
so helps you easily recognize the room when you are remotely controlling the
thermostat.
To name a room
1. On the "Settings" page, tap
2. Tap the text field, and then enter a room name as desired, or tap
name from the pre-set list.
3. Tap "OK" once you've entered the room name.
NOTE: It is recommended that only installers or experts with detailed know-how
about the thermostat change advanced settings.
Under Advanced settings, you can:
●
Manage the administrator password
●
Connect to a WLAN network if the thermostat is selected for commercial use
●
Scan the QR code of the activation code
●
Change a time zone
●
Adjust different application settings
●
Re-set up the thermostat
●
Check the basic information about your thermostat
The first three options are described in separate sections. This section describes
the remaining options.
When there is internet connection, the thermostat automatically detects the time
zone for you. However, you can also change it manually.
To change the time zone
1. On the Home screen, tap
2. If prompted, enter the administrator password.
3. Tap > > "Adapt", and then select an area on the map.
4. Tap or to scroll to a desired time zone, tap to select it and then tap .
5. If it is connecting to the cloud, the thermostat detects the date and time
automatically for you based on your previously-selected time zone. If it is not
connecting to the cloud, follow the on-screen instructions to set the year, month
and date manually.
Operating the thermostat on the device
> .
, then tap and .
6
Advanced settings
to select a
27 | 59