Analog Reference Card: F2-01; Digital Reference Card: F3-01 - YASKAWA VARISPEED-616G5 Instruction Manual

Advanced Operation
7.5.4 Option Constants: F
7
Setting: 1 to 5
Setting: 6

Analog Reference Card: F2-01

J
When using a AI-14B/A1-14U Analog Reference Card, set constant b1-01 (reference selection) to "3"
D
(option).
When using a AI-14B, set the function for channels 1 to 3 with constant F2-01. (There are no constants
D
to set for AI-14U.)
User User
Name
Constant
Number
Bi-polar or uni-polar
F2-01
input selection
Settings
D
Setting
0
3-channel individual input (CH1: terminal 13; CH2: terminal 14; CH3:
terminal 16)
1
3-channel additional input (Sum of CH1 to CH3 is used as the frequen-
cy reference value.)
Constant b1-01 (reference selection) must be set to "1" (external terminal), when 3-channel individual
D
input (setting: 0) is set.
When using a AI-14B and setting 3-channel individual input, the multi-function inputs cannot be set
D
to the Option/Inverter selection function (setting: 2).

Digital Reference Card: F3-01

J
When using a DI-08 or DI-16H2 Digital Reference Card, set constant b1-01 (reference selection) to
D
"3" (option) and set the input method with constant F3-01.
User User
Constant Name
Number
F3-01 Digital input option
Settings
D
Setting
0
BCD 1% unit
1
BCD 0.1% unit
2 BCD 0.01% unit
3 BCD 1 Hz unit
4 BCD 0.1 Hz unit
5 BCD 0.01 Hz unit
6 BCD special setting (5-digit input) (Only when DI-16H2 is used.)
7 Binary input (Setting is displayed in decimal notation.)
The maximum frequency (100% speed) reference will be used when the binary input is set (setting:
D
7) and all bits are "1."
DI-08:
•
DI-16H2:
•
Setting 6, BCD special setting (5-digit input), is valid only when the D1-16H2 is used. Using this set-
D
ting, a frequency from 0.00 to 399.98 Hz can be set in BCD. The data input method is different from
that for settings of 1 to 5.
3
Sign 8 × 10 4 × 10
4 4
2 × 10 1 × 10 8 × 10
The sign bit is used as a data bit, so only positive (plus) data can be set.
D
The second digit below the decimal point is set by bits 8x10
D
made in units of 0.02 Hz. (If these three bits are "111," "110," and "101," they will be recognized as
"9.")
If "2" or higher is set for o1-03, the input will become BCD, and the units will change to the o1-03
D
setting.
Change g
during during Setting Setting
Opera- Range
tion
0, 1
×
Change g
Setting Setting
during during
Range
Opera-
tion
0 to 7
×
Maximum output frequency reference (255/100%).
Maximum output frequency reference (16 bits: 30000/100%, 12 bits: 4095/100%).
3 3 3
2 × 10 1 × 10
3 3 3
4 × 10 2 × 10
7 - 60
Valid Access Levels
Unit Factory Factory
V/f V/f with
Setting
Control PG
B
− 0
Description
(b1-01 = 1)
(b1-01 = 3)
Valid Access Levels
Unit Factory Factory
V/f V/f with
Setting
Control PG
− 0 B
Description
0 0
8 × 10 4 × 10 2 × 10
⋅⋅⋅
1 0
1 × 10 8 × 10 4 × 10
⋅⋅⋅
0 0
, 4x10 , and 2x10
Open
Flux
Loop
Vector
Vector
B B B
Open
Flux
Loop
Vector
Vector
B B B
0 0
1 × 10
0 0
2 × 10
0
, so the settings are