Download
Share
Print this page
YASKAWA VARISPEED-616G5 Instructions Manual
  1. Manuals
  2. Brands
  3. YASKAWA Manuals
  4. Relays
  5. VARISPEED-616G5
  6. Instructions manual

YASKAWA VARISPEED-616G5 Instructions Manual

2c-relay output card
Hide thumbs Also See for VARISPEED-616G5:
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual
VARISPEED-616G5 OPTION CARD
2C-RELAY OUTPUT CARD DO-02C
INSTRUCTIONS
Upon receipt of the product and prior to initial operation, read these instructions
thoroughly, and retain for future reference.
YASKAWA
YASKAWA
MANUAL NO. TOE-C736-40.8

Advertisement

loading

Related Manuals for YASKAWA VARISPEED-616G5

Summary of Contents for YASKAWA VARISPEED-616G5

  • Page 1 YASKAWA VARISPEED-616G5 OPTION CARD 2C-RELAY OUTPUT CARD DO-02C INSTRUCTIONS Upon receipt of the product and prior to initial operation, read these instructions thoroughly, and retain for future reference. YASKAWA MANUAL NO. TOE-C736-40.8...

  • Page 2: Notes For Safe Operation

    NOTES FOR SAFE OPERATION Read this instruction manual thoroughly before installation, operation, maintenance or inspection. In this manual, the NOTES FOR SAFE OPERATION is classified as “CAUTION”. CAUTION Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury to personnel and damage to equipment.
  • Page 3 The 2C-relay output card, DO-02C is mounted on the control board of the invert- er to output two 1C dry contacts. This option card is applicable to the following inverter series: VS−616G5: Entire series Name Code No. Functions C (1A-1B) dry contact output ×2 circuits 2C-relay Contact open/close capability: output card...

  • Page 4: Inspection After Delivery

    S Check the name written on the product to verify that ordered products have been delivered. S Check for damage caused during transportation. If there is anything uncertain on the structure, contact your YASKAWA repre- sentative.

  • Page 5: Installation Procedure

    Installing to Inverter (See Fig. 2) Installation Procedure Turn OFF the main power and wait for the time specified on the cover of the inverter. Remove the cover and verify that the CHARGE indicator lamp is OFF. Plug the 3CN connector of 2C-relay output card DO-02C into the 3CN con- nector (34 pins) on the control board of the inverter.
  • Page 6 Interconnection Fig. 3 shows interconnection between the inverter, DO-02C, and peripheral equipment. Inverter Motor VS-616G5 DO-02C Interconnection diagram Fig. NOTE Care must be taken with the cables connected to DO−02C according to the use of the card. Observe the following. S If the card is to be used as a heavy current circuit (for main circuit wiring, or as any other type of circuit that emits much noise), separate the cables from other signal cables.
  • Page 7 Wiring See Table 1 for the functions of the external terminals. External terminals Table Terminal block Pin No. Functions symbol No. 1 output, Normal close (NC) contact No. 1 output, Normal open (NO) contact No. 1 output, Common terminal No. 2 output, Normal close (NC) contact No.
  • Page 8 Related constants for 2C-Relay Output Card DO-02C Related constants for 2C-Relay Output Card DO-02C Table Operator Change Operator Constant Setting Factory function Name during Reference display range setting display operation S Refer to Table 3 for the output func- DO-02 F5-01 Channel 1 output 0 to FF...

This manual is also suitable for:

Do-02c