Acceleration/Deceleration: C1; Autotuning Constants: C - YASKAWA VARISPEED-616G5 Instruction Manual

8.2.2 Autotuning Constants: C

Acceleration/Deceleration: C1

J
Name
C Constant
Number
Display
Acceleration time 1
C1-01 C1 01
Accel Time 1
Deceleration time 1
C1 02 C1-02
Decel Time 1
Acceleration time 2
C1-03 C1 03
Accel Time 2
Deceleration time 2
C1-04 C1 04
Decel Time 2
Acceleration time 3
C1 05 C1-05
Accel Time 3
Deceleration time 3
C1 06 C1-06
Decel Time 3
Acceleration time 4
C1 07 C1-07
Accel Time 4
Deceleration time 4
C1-08 C1 08
Decel Time 4
Emergency stop time
C1 09 C1-09
Fast Stop Time
Accel/decel time set-
ting unit
C1-10 C1 10
Acc/Dec Units
Accel/decel time
switching frequency
C1-11 C1 11
Acc/Dec SW Freq
* The setting range for acceleration/deceleration times will differ according to the setting for C1-10 (the unit for acceleration/de-
celeration time.) When C1-10 is set to 0, the setting range for acceleration/deceleration times becomes 0.00 to 600.00 seconds.
Description
Sets the acceleration time to ac-
celerate from 0 to the maximum celerate from 0 to the maximum
output frequency, in 1-second
units.
Sets the deceleration time to de-
celerate from the maximum output celerate from the maximum output
frequency to 0, in 1-second units.
The acceleration time when the
multi-function input "accel/decel multi function input "accel/decel
time 1" is set to ON.
The deceleration time when the
multi-function input "accel/decel multi function input "accel/decel
time 1" is set to ON.
The acceleration time when the
multi function input "accel/decel multi-function input "accel/decel
time 2" is set to ON.
The deceleration time when the
multi-function input "accel/decel multi function input "accel/decel
time 2" is set to ON.
The acceleration time when the
multi-function input accel/decel multi-function input "accel/decel
time 1" and "accel/decel time 2"
are set to ON.
The deceleration time when the
multi-function input accel/decel multi-function input "accel/decel
time 1" and "accel/decel time 2"
are set to ON.
The deceleration time when the
multi-function input "Emergency
( (fast) stop" is set to ON. ) p
:This function can be used a
stopped method when a fault
has been detected.
0: 0.01-second units
1 0 1 1: 0.1-second units d it
Sets the frequency for automatic
acceleration/deceleration switch-
ing.
Below set frequency: Accel/decel
time 4
Above set frequency: Accel/decel Ab t f A l/d l
time 1
:The multi-function input "accel/
decel time 1" or "accel/decel
time 2" take priority.
8 - 11
8.2 Programming Mode Constants
Change Change
S Setting Factory during
Opera-
Range Setting
V/f
tion
Q Q
f f
Q Q
f f
B B
f f
B B
f f
A A
× ×
0.0 to 0.0 to
10.0
6000.0
* *
A A
× ×
A A
× ×
A A
× ×
B B
× ×
A A
0, 1 0, 1 1 1
× ×
0.0 to
A A
0.0 0.0
× ×
400 0 400.0
Control Methods
V/f
Page
Open
Flux
with
Loop
Vector
Vector
PG
6 - 10 6 10
Q Q Q Q Q Q
6 - 17
6 - 10 6 10
Q Q Q Q Q Q
6 - 17
6 - 10 6 10
B B B B B B
6 - 17
6 - 10 6 10
B B B B B B
6 - 17
6 10 6 - 10
A A A A A A
6 - 17
6 10 6 - 10
A A A A A A
6 - 17
6 10 6 - 10
A A A A A A
6 - 17
6 - 10 6 10
A A A A A A
6 - 17
6 10 6 - 10
B B B B B B
6 - 17
6 - 10
A A A A A A
6 - 17 6 17
A A A A A A
6 11 6 - 11
8