Option Constants: F; Installing Option Cards; Option Card Specifications; Installation Locations For Option Cards - YASKAWA VARISPEED-616G5 Instruction Manual

200v class 0.4 to 75kw (1.2 to 110kva) 400v class 0.4 to 300kw (1.4 to 460kva)
Hide thumbs Also See for VARISPEED-616G5:
Table of Contents

Advertisement

7.5.4 Option Constants: F

Installing Option Cards

J
A maximum of three Option Cards can be installed in the Inverter. The installation location of each is deter-
mined by the type of Card. Be sure to install the Cards in their correct locations.
Table 7.7
Type of card
Analog Reference Card
Analog Reference Card
Digital Reference Card
Digital Reference Card
PG Speed Control Card
PG Speed Control Card
Analog Monitor Card
Analog Monitor Card
Pulse Monitor Card
Installation Procedure
1. Turn OFF the Inverter's main-circuit power supply. Wait at least one minute (or at least three minutes
for models of 30 kW or more).
2. Remove the Inverter's front cover. Check to be sure that the CHARGE LED is turned OFF.
3. Check the Option Card's installation location (A, C, or D). (See Figure 7.32.)
4. Insert the accessory spacer into the spacer mounting hole in the Inverter mounting base.
5. Align the Option Card connector with the connector position on the control board, and then pass the
spacer to the spacer mounting hole on the card.
Press firmly until the spacer snaps into place.
6. Connect the Option Card's FG connection line to the Inverter ground terminal (terminal 12).
4CN
Option A con-
nector
2CN
Option C con-
nector
3CN
Option D con-
nector
Fig 7.32

Option Card Specifications

Model
AI-14U
14-bit analog, 2 inputs (voltage/current)
AI-14B
14-bits analog, 3 inputs
DI-08
8-bit digital input (BCD/binary)
DI-16H2
16-bit digital input (BCD/binary)
PG-A2
Open-collector/complementary, single input
PG-B2
Complementary, A/B-phase input
PG-D2
Line-driver, single input
PG-X2
Line-driver, A/B-phase input
AO-08
8-bit analog output, 2 channels
AO-12
12-bit analog output, 2 channels
PO-36F
Pulse frequency output
Option A
7CN
[Front View]

Installation Locations for Option Cards

7 - 59
7.5 Common Functions
Specifications
Inverter
mounting base
Option C
Control board
Option D
[Side View]
Location
C
C
C
C
A
A
A
A
D
D
D
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents