Connecting Tl Inverters Using Solrenview Monitoring Option - YASKAWA PVI 23 TL Installation And Operation Manual

PVI 23TL, 28TL Installation and Operation Manual (Rev J)
7.2

Connecting TL Inverters using SolrenView Monitoring Option

Solectria offers SolrenView monitoring as an option for the PVI 23-28TL inverters. In Gen III PVI
23-28TL inverters, SolrenView hardware is no longer an integrated option, only external. This
option (SRV-LCD-3PTL-OUTDOOR) includes the SolrenView data logger which comes in an
outdoor rated enclosure. The SolrenView logger is used to connect the TL inverters to the
Solectria SolrenView web-based monitoring site.
In Gen III the SolrenView gateway cannot be factory installed inside of the inverter.
Figure 7.7 – High Level Block Diagram of the SolrenView Data Acquisition Infrastructure
Figure 7.8 – Multiple Inverters with SolrenView Data Logger
NOTE: The SolrenView data logger in Figure 7.8 is installed next to the first
inverter. This is a typical installation.
DOCR-070365-J Page 39 of 66