Advertisement
Press the right arrow until "LCMP REF" shows in the display along with the load
1 1 6 6 ) )
compensation average temperature (if load compensation is set to "OFF", then
"_ _ _" shows in display and setting cannot be programmed). This is the average
cooking temperature for each product. The timer speeds up at temperatures
above this setting and slows down at temperatures below this setting. Press the
product buttons, or the up or down arrow, to change this value.
F F u u l l l l H H e e a a t t
Press the right arrow until "FULL HT" shows in the display along with the full
1 1 7 7 ) )
heat value in seconds, which means the heat is on as soon as a timer is
pressed, for the programmed length of time. Press the product buttons, or the
up or down arrow, to change this value of 0 to 90 seconds.
P P C C F F a a c c t t o o r r
Press the right arrow until "PC FCTR" shows in the display along with the
1 1 8 8 ) )
proportional temperature, which helps to keep the oil from over-shooting the set-
point temperature. Press the product buttons, or the up or down arrow, to
change this value of 0 to 50 degrees.
NOTE:
• Use the left arrow to go back to previous menu items.
• Press the right arrow when finished with current product, to return to the "SELECT
PRODUCT" step.
• Press and hold the program button to exit Product Program Mode.
57
Advertisement
