Advertisement
When main power switch is turned on, "OFF" shows in both displays. Press
2 2 ) )
either heat button and "*SETUP* *ENTER CODE*" shows in display. Press 1, 2,
3, and "LANGUAGE" shows on the left display, "ENGLISH" on the right display.
Use the up or down arrow to change the operation display to: Greek
3 3 ) )
"EΛΛHNIKA", Russian "РУССКИИ", Swedish "SVENSKA", German
"DEUTSCHE", Portuguese "PORTUG.", Spanish "ESPANOL", or French
"FRANCAIS".
Press the right arrow to continue with the other set-up items which include:
4 4 ) )
• TEMP FORMAT - °F or °C
• TIME FORMAT - 12-HR or 24-HR
• ENTER TIME - Time of day (use product buttons to change)
• ENTER TIME - AM or PM
• DATE FORMAT - MM-DD-YY or DD-MM-YY
• ENTER DATE - Today's date (use product buttons to change)
• DAYLIGHT SAVING TIME - 1.OFF; 2.US (2007 & after); 3.EURO; 4.FSA (US
before 2007)
• FRYER TYPE - ELEC or GAS
• VAT TYPE - FULL or SPLIT
• AUTOLIFT ENABLED? - NO LIFT or YES LIFT
• BULK OIL SUPPLY - YES or NO
• BULK OIL DISPOSE? - YES or NO
• S/N - Shows serial number of the unit or can be recorded (THIS SERIAL
NUMBER SHOULD MATCH THE SERIAL NUMBER ON THE DATA PLATE,
ON THE DOORS.)
• 2nd LANGUAGE - By setting a second language in the controls, 2 languages
can now be easily chosen by pressing the program button during normal
operation. One language shows in the left display and the second language
shows in the right display. Pressing "✓" button under desired language,
selects that language seen in displays.
• 2nd VOLUME - By setting a second volume in the controls, 2 volumes can
now be easily chosen by pressing the program button twice during normal
operation. One volume setting shows in left display (NONE to 10; 10 being the
loudest) and a second volume shows in right display. To select volume, press
"✓" button under desired volume .
• SETUP COMPLETE - OFF is displayed and unit shuts down.
NOTE:
• Unless otherwise indicated, use the up or down arrow to change settings.
• Setup Mode can also be accessed by re-initializing the controls, in Special
Program Mode, in Level 2 programming (see ).
17
Advertisement
