Henny Penny Wendy's Evolution Elite EEG-251 Operator's Manual page 35

3.9.2 Removing/Cleaning Reservoir
Open door and pull reservoir forward.
1 1 ) )
Slide reservoir to the left and lift from fryer.
2 2 ) )
Clean reservoir at a sink with soap and water.
3 3 ) )
NOTE: Before placing the reservoir back into position, lubricate the O-rings on the
filter tube with cold oil. Check O-rings for tears or nicks and replace if necessary. To
replace O-ring, use a small, flat-bladed screwdriver, pry upon the O-ring and pull off of
end of tube.