Manual Reception (Manual Mode); Automatic Fax Only Reception (Fax Mode) - Brother FAX-8350P Owner's Manual

42
C H A P T E R F I V E
See
"Fax/Tel
(F/T) Mode
Only"
in this
chapter
3. Fax/Tel (F/T)
with an
( )
External
Telephone
4. TAD
The TAD setting works only with an external telephone answering device
(TAD). Ring Delay and F/T Ring Time do not work in this setting.

Manual Reception (Manual Mode)

When you set the Answer Mode to manual (the Fax and F/T lights are
both off), you must answer each incoming call yourself. Select this mode
by pressing Mode key. Here is what you should do when using Manual
Mode:
If You Get a...
1. Regular phone call
2. Phone call and
request to send a fax
3. Fax tone...

Automatic Fax Only Reception (Fax Mode)

You can automatically receive all your faxes in Automatic Fax Reception
mode (Fax light is on). Select this mode by pressing Mode.
Fax
Use this function if you expect to receive
many fax messages and seldom phone
TAD
calls. The machine automatically answers
F/T
every call. If the call is a fax, it prints the
fax. If the call is not a fax, it signals you
with an F/T pseudo-ring, different from the
phone company ringing, to alert you to
pick up the call. If you select this setting,
you'll need to set the Ring Delay and F/T
Ring Time features (on the following
pages).
This is the only setting in which you can
Fax
use an external answering machine. Your
TAD
telephone answering device is connected to
F/T
your machine, and answers every call.
Once the external telephone answering
device (TAD) answers, the machine listens
for fax tones. If it detects fax tones, fax
messages are printed.
Then You Should...
Talk as you normally would.
Press Start when finished talking, and
replace the external telephone's handset.
NOTE: Sender must also press Start.
Wait until the fax machine takes over the
call or press Start.