Table of Contents
Advertisement
38
C H A P T E R F I V E
4. TAD
(
)
For MFC-
9050
The TAD setting works only with an external telephone answering device
(TAD). Ring Delay and F/T Ring Time do not work in this setting.
5. TAD
Fax
(
)
For MFC-
TAD
9550
F/T
Manual Reception (Manual Mode)
When you set the Answer Mode to manual, you must answer each
incoming call yourself. Here is what you should do when using Manual
Mode:
If You Get a...
1. Regular phone call
2. Phone call and
request to send a fax
3. Fax tone...
Automatic Fax Only Reception (Fax Mode)
You can automatically receive all your faxes in Automatic Fax Reception
mode (Fax light is on). Select this mode by pressing Mode.
This is the only setting in which you can
Fax
use an external answering machine. Your
TAD
telephone answering device is connected to
F/T
your machine, and answers every call.
Once the external telephone answering
device (TAD) answers, the machine listens
for fax tones. If it detects fax tones, Fax
messages are printed.
The MFC-9550 provides you with a built-
in digital Message Manager for fax and
voice. When you set the machine to answer
calls, it will record up to 20 minutes of
messages. For more information about
Message Manager operation, please see
chap. 10.
Then You Should...
Talk as you normally would.
Press Start when finished talking, and
replace the handset.
NOTE:Sender must also press Start.
Press Start, and replace the handset.
Advertisement
Table of Contents
