Manual Reception (Manual Mode); Automatic Fax Only Reception (Fax Mode) - Brother MFC-730 Owner's Manual

44
C H A P T E R S I X
4. TAD
( )
For MFC-
730
The TAD setting works only with an external telephone answering
device (TAD). Ring Delay and F/T Ring Time do not work in this
setting.
4. TAD
( )
For MFC-
740

Manual Reception (Manual Mode)

When you set the Answer Mode to manual, you must answer each
incoming call yourself. Here is what you should do when using Manual
Mode:
If You Get a...
1. Regular phone call
2. Phone call and
request to send a fax
3. Fax tone...

Automatic Fax Only Reception (Fax Mode)

You can automatically receive all your faxes in Automatic Fax Reception
mode (Fax light is on). Select this mode by pressing Mode.
This is the only setting in which you can
FAX
use an external answering machine. Your
TAD
telephone answering device is connected to
your machine, and answers every call.
F/T
Once the external telephone answering
device (TAD) answers, the machine listens
for fax tones. If it detects fax tones, Fax
messages are printed.
The MFC provides you with a built-in
FAX
digital Message Manager for fax and
TAD
voice. When you set the MFC to answer
calls, it will record up to 99 minutes of
F/T
messages. For more information about
Message Manager operation, please see
chap. 12.
Then You Should...
Talk as you normally would.
Press Start when you have finished talking
NOTE:Sender must also press Start.
Press Start, and replace the handset.