To Print A Report; Activity Report Interval; Transmission Verification (Xmit) Report - Brother FAX1 570MC Owner's Manual

84
C H A P T E R T E N
See
FAX/MFC
Activity
p. 83

To print a report

1
Press Function , .
3
2
Enter the number of the report you want to print. For example, press
print the TEL.INDEX.
3 Start
Press .
4 Stop
Press to exit.

Activity Report Interval

You can set the FAX/MFC to print activity reports at specific intervals (6, 12, 24
hours, 2, 4, or 7 days). Even if you set the interval to OFF, you can print the report
at any time by following the steps in the previous section.
1 Function
Press , 7 ,
ACT.RPT.:OFF
2
Press or to choose your setting. If you choose 7 days, the screen
prompts you to choose a day at which to begin the 7-day countdown.
3
When the screen displays the setting you want, press
4
Enter the time to begin printing, in 24-hour format. (For example, enter
19:45 for 7:45 PM).
5
Wait 2 seconds.
6 Press Stop to exit.

Transmission Verification (Xmit) Report

You can use the Xmit Report as proof that you sent a fax. This report lists the
name or fax number of the receiving party, the time and date of transmission,
and if the transmission was successful.
When the feature is OFF, the report is printed automatically only if there's an error
during transmission. If the report indicates NG, send the document again. If the
report indicates you should check the readability of certain pages, resend those pages.
When the feature is ON, the report is printed with every fax you send.
1
Press Function , ,
3
2
Press or to select ON (or OFF).
3
Set
Press .
4 Stop
Press to exit.
3 . The screen displays the current interval setting.
.
7
to
3
Set .