Setting The Fiscal Core (Fc) Flags; Master Currency; Tab. 5.7: Flags For Menu 920/1-Fc Settings For Master Currecny - ELCOM EURO-2500 Service Manual

Service manual Service manual Service manual Service manual Service manual Service manual Service manual Service manual
5.5 Setting the fiscal core (FC) flags 5.5 Setting the fiscal core (FC) flags
Look up "FC settings" in the service mode menu or enter the
code 920 and press O
K
900.Service mode
920.FC settings
Following chapters employ the below listed symbols:
D - the flag can be changed only after the daily report;
GT - the flag can be changed only if the GrandTotals
(GTs) are zero;
SF - the flag is dependent on the other flags in its group,
the relevant flag numbers are listed after the sym-
bol (e. g. SF 1, 2, 3 – this flag is dependent on flags #1,
#2, and #3 in its group);
DATE - relevant only for the date flag – formal check is re-
quired prior to change;
TIME - relevant only for the time flag – formal check is re-
quired prior to change;
HW - ECR has to be hardware manipulated prior to chang-
ing the flag if the legislation requires;
JMP - the flag cannot be changed – ECR sets it according
to the jumpers;
AUTO - the flag cannot be changed it is automatically de-
tected;
N - the flag cannot be changed in specified national
version.
Moreover, at REG, CUR, TAX, and UN the ECR is checked
whether its fiscal memory (FM) is not set read-only.

5.5.1 Master currency

5.5.1 Master currency
1. Look up "Master currency" in the FC settings submenu or
enter the code 1 and press O
Display
1.Round prices
2.Round taxes
3.Round sale
4.Display prices
5.Rnd.way prices
6.Rnd.way taxes
7.Rnd.way sales
8.Negative slot
9.Tax system
10.Curr.print
11.Currency abbr
Tab. 5.7: Flags for menu 920/1—FC settings for master currecny
56
E (N E ).
NTER UM NTER
|
E (N E
K NTER UM NTER
Default Description
2 number of decimal places for rounding the prices (SF 4; D)
2 number of decimal places for rounding the taxes (SF 4; D)
2 number of decimal places for rounding the sale (SF 4; D)
number of decimal places for displaying the prices, taxes, and
2
sales (SF 1, 2, 3; D)
0 way of rounding the prices (D)
0 way of rounding the taxes (D)
0 way of rounding the sales (D)
1 drawer withdrawal may cause negative value in drawer
0 tax system (GT)
1 currency abbreviation print position (D)
GBP master currency description (D, CUR)
2. Select the item you want to change using the arrows or
enter its code and press O
shown behind the text is the current setting. Use table 5.7
to select appropriate values.
3. Use the up and down arrows to set the required value or
enter it directly using keyboard and press O
E ).
M NTER
4. The newly set value will appear after the item text.
Note: It is recommended to perform the annual report prior
to changing the flag #11 (currency abbreviation) in order to
avoid the mixing of individual master currencies.
The changes made to the taxes are commited after the final
confirmation, when the serviceperson leaves menu 920/4.
). Select 'Yes' to save changes, 'No' discards any changes.
920.FC settings
1.Master currency
E (N
K NTER
1.Master currency
3.Round sale 2
3.Round sale 2
'1'
1.Master currency
3.Round sale 1
Available values
0 – 3; flag value has to be ≤ than
flag #4 value
0 – 3; flag value has to be ≥ than
flag #1, #2, and #3 values
0 – standard (5 rounds up),
1 – round down, 2 – round up,
3 – round by quarters
0 – no, 1 – yes
0 – European, 1 – American
0 – behind the financial value,
1 – in front of, 2 – do not print
three character text (non-empty
and without numerals)
© Elcom s. r. o.
>
E ). The number
UM NTER
|
E (N -
K NTER U
|
|
Euro 2500
TX