Ecr Service Mode; Entering The Service Mode; Service Mode Commands Listing - ELCOM EURO-2500 Service Manual

© Elcom s. r. o.
The service mode allows you to perform:
- actual ECR tests
- set the communication parameters for individual devices
- set the ECR system flags
- programming
- service functions
The service mode is accessible only after the standard password (maximum 6 characters long) was entered and this pass-
word can be changed as you wish. Access into the service mode is available also using the universal password, in case you
forgot the standard one.
In the following text the keys will be described as follows, because the Euro-2500TX can also employ a PC keyboard: e. g.
T (E ); O E (N
OTAL NTER K NTER
as shown in the User Manual, chapter 2.4 and the name in parentheses denotes a PC keyboard key. The key denoted as E
is the keypad E (the large key near the letters) and the N
NTER
Description of the most important keys in service mode flags programming: Description of the most important keys in service mode flags programming:
O E (N E )
K NTER UM NTER
C E
(E )
ANCEL SC SC
B S (B )
ACK PACE ACKSPACE
B M (F2)
ACK ENU

5.1 Entering the service mode

5.1 Entering the service mode
How to enter the ECR service mode:
1. Look up "Service mode" in the main menu or enter the code 900 and press O
2. Enter the standard password and press O
The default service mode password is set to "123456".
3. If you wish to print all the service mode settings and flags, press O
mode.
Note: The ECR allows printing of the settings and flags for the basic submenus as well (system flags, FC settings, peripherals,
memory partition). After entering the submenu, press O
the given submenu.

5.2 Service mode commands listing

5.2 Service mode commands listing
900. Service mode (enter the password)
Printout
910. System Flags
Printout
1. Application mode
2. Print on journal
3. Settings in P mode
4. S/D link,RA/PO,...
5. Print settings 1
6. Print settings 2
7. Receipt print mode
8. Beeper on/off
Euro 2500
TX

5 ECR service mode

E )... The name before the parentheses denotes a standard Euro-2500TX keyboard key name
UM NTER
– is used to enter the typed value
– is used to remove the error messages and restores the original values dur-
– is used for gradual erasing of typed characters and also represents an
– returns to the next upper menu level (if any)
E is the E
UM NTER
ing the programming of individual items
empty text string during the programming of texts
E E
(N ). You have now entered the ECR service mode. Note:
K NTER UM NTER
E E
(N ) and the printer prints the programmed values for
K NTER UM NTER
9. Direct key's step
10. Smart bill number
11. Various settings
12. Change password
13. Cust. lines descr.
14. Applic. texts
920. FC settings
Printout
1. Master currency
2. Secondary curr.
3. Miscellaneous
4. Taxes
key on the numpad (the rightmost key).
NTER
E (N E
K NTER UM NTER
E (N E ) after entering the service
K NTER UM NTER
Service manual
NTER
).