Direct Keys' Shift Value; Smart Bill And Its Settings; Various Settings; Changing The Standard Service Mode Password - ELCOM EURO-2500 Service Manual

Service manual Service manual Service manual Service manual Service manual Service manual Service manual Service manual
Numeral Default Description
Automatic cashier log off if a bill was suspended or cancelled or a sale was
1 st 0
finished
2 nd 1 Height of print font for external printer(s)
Tab. 5.5: Flags for menu 910/11—various settings

5.4.9 Direct keys' shift value

5.4.9 Direct keys' shift value
The shift value that is added to the value for the key using
the shift keys as SHIFT, CTRL, or ALT can be set here. The value
shouldn't be below the programmed number of direct keys.
1. Look up "Direct key's step" in the system flags submenu
or enter the code 9 and press O
9.Direct key's step
2. Enter value within 1-560 and press O
910.System Flags
9.Direct key's step
Default shift value (SV) is 52. Individual shift keys take the
multiples of basic shift value: "L
S " – 2 × SV; "L C
HIFT EFT TRL
C
" – 5 × SV.
TRL
Example: The shift value is set to 52. Value for the "
1, and the respective combinations are: "L
"R S + " is 105, "L
IGHT HIFT A
one key can be assigned, using the shift keys, up to six direct
keys.
Practical example: Key "
bread", "L S + " PLU #2 named "Wheat bread", "R
EFT HIFT A
S + " PLU #3 named "Wholegrain bread", etc...
HIFT A

5.4.10 Smart bill and its settings

5.4.10 Smart bill and its settings
Smart bill is used for registration without the opening of a
new bill and is identified through its number. The cashier au-
tomatically uses the smart bill if he/she enters any sequence
ended by PLU, EAN, direct key PLU or scanned bar-code PLU
in the main menu. This setting is available in restaurant ECR
mode only. The smart bill using the set number cannot be
suspended; it has to be finished by payment or bill voidance.
The table with corresponding number has also to be created
(e. g. if the smart bill number is 88.9, the table number 88
has to be created). Setting the smart bill number to 100.0 can
turn off this feature.
1. Look up "Smart bill number" in the system flags submenu
or enter the code 10 and press O
54
E (N E
K NTER UM
52
E (N
K NTER
|
S " – 1 × SV; "R
EFT HIFT
" – 3 × SV; "R A " – 4 × SV; "R
IGHT LT
S
EFT HIFT
C + " is 157, etc. Consequently,
EFT TRL A
" can be assigned PLU #1 named "Rye
A
E E
(N
K NTER UM
2. Enter the number within 1.0-100.0 and press O
E
). Default value is 99.0.
M NTER
).
NTER

5.4.11 Various settings

5.4.11 Various settings
E ).
UM NTER
This menu contains only the flag for logging off the cashier
after the bill was cancelled/deferred/paid for and printing to
external printers.
1. Look up "Various settings" using arrows or enter code 11
and press O
IGHT
IGHT
" key is
A
+ " is 53, 2. Enter the desired value according to the table 5.4 and
A
press O
IGHT
5.4.12 Changing the standard service mode 5.4.12 Changing the standard service mode
password password
The standard service mode password allows the service
technician to enter the ECR service mode. There is also a uni-
versal password, used in cases when the user forgets his/her
service mode password. In such cases contact the Elcom
company service.
How to change the standard service mode password:
1. Look up "Change password" in the system flags submenu
or enter the code 12 and press O
).
NTER
Available values
0 – no, 1 – yes
0 – standard height, 1 – double
height
910.System Flags
10.Smart bill number
10.Smart bill number
E (N E ).
K NTER UM NTER
910.System Flags
11.Various settings
E (N E ).
K NTER UM NTER
11.Various settings
K
910.System flags
12.Change password
© Elcom s. r. o.
>
E -
(N
K NTER U
99.00
|
0 1
E E
(N ).
NTER UM NTER
|
Euro 2500
TX