Safety; Intended Use; System Requirements; Safety Regulations - Pilz PNOZ m B0 Operating Manua

Safety

3 Safety
3.1

Intended use

The configurable control system is used for the safety-related interruption of safety circuits
and is designed for use in:
E-STOP equipment
}
Safety circuits in accordance with VDE 0113 Part 1 and EN 60204-1
}
Intended use includes making the electrical installation EMC-compliant. The product is
designed for use in an industrial environment. It is not suitable for use in a domestic envi-
ronment, as this can lead to interference.
The following is deemed improper use in particular:
Any component, technical or electrical modification to the product
}
Use of the product outside the areas described in this manual
}
Use of the product outside the technical details (see chapter entitled "Technical De-
}
tails")
3.2

System requirements

Please refer to the "Product Modifications" document in the "Version overview" section for
details of which versions of the PNOZmulti Configurator can be used for this product.
3.3

Safety regulations

3.3.1

Use of qualified personnel

The products may only be assembled, installed, programmed, commissioned, operated,
maintained and decommissioned by competent persons.
A competent person is someone who, because of their training, experience and current
professional activity, has the specialist knowledge required to test, assess and operate the
work equipment, devices, systems, plant and machinery in accordance with the general
standards and guidelines for safety technology.
It is the company's responsibility only to employ personnel who:
Are familiar with the basic regulations concerning health and safety / accident preven-
}
tion
Have read and understood the safety guidelines given in this description
}
Have a good knowledge of the generic and specialist standards applicable to the
}
specific application.
Operating Manual PNOZ m B0
1002660-EN-02
ATTENTION!
Inputs and outputs for standard functions must not be used for safety-relat-
ed applications.
10