Pilz PNOZ m B0 Operating Manua page 31

Technical details
Configurable inputs/outputs (inputs or auxiliary
outputs)
Voltage at "1"
Inputs
Number
Voltage at inputs
Input current at rated voltage
Input current range
Pulse suppression
Maximum input delay
Potential isolation
Test pulse outputs
Number of test pulse outputs
Voltage
Current
Max. duration of off time during self test
Short circuit-proof
Potential isolation
Semiconductor outputs
Number of positive-switching single-pole semicon-
ductor outputs
Switching capability
Voltage
Current
Permitted current range
Residual current at "0" signal
Max. transient pulsed current
Max. capacitive load
Max. internal voltage drop
Max. duration of off time during self test
Switch-off delay
Potential isolation
Short circuit-proof
Times
Simultaneity in the two-hand circuit
Processing time
Environmental data
Ambient temperature
In accordance with the standard
Temperature range
Forced convection in control cabinet off
Storage temperature
In accordance with the standard
Temperature range
Climatic suitability
In accordance with the standard
Condensation
Operating Manual PNOZ m B0
1002660-EN-02
772100
UB - 2 V at 0.1 A
772100
12
24 V DC
5 mA
2,5 - 5,3 mA
0,5 ms
2 ms
No
772100
4
24 V
0,1 A
5 ms
Yes
No
772100
4
24 V
2,0 A
0,00 - 2,50 A
0,05 mA
12 A
1 µF
500 mV
330 µs
1 ms
Yes
Yes
772100
0,5 s
30 ms
772100
EN 60068-2-14
0 - 60 °C
55 °C
EN 60068-2-1/-2
-25 - 70 °C
EN 60068-2-30, EN 60068-2-78
Not permitted
31