Operation
7.2.1.2
Pull out and retract the knob
The rotary knob:
(A) should be pulled out until it clicks into position
}
(B) then released and retracted back into the unit:
}
–
–
7.2.1.3
Rotate and press the knob
The settings are made via the rotary knob, as follows:
Press the knob
Confirm selection/setting
}
Switch to menu
}
Rotate knob
Select menu level
}
Operating Manual PNOZ m B0
1002660-EN-02
A
Press the latch on the side of the rotary knob (1) towards the centre of the knob.
This releases the rotary knob.
Press the knob downwards (2) while keeping the latch held down.
2.
1.
B
26