Upgrading Legacy Flexnet Amplifiers - C-COR Flex Max901e Equipment Manual

Upgrading Legacy FlexNet Amplifiers

This chapter describes how to upgrade existing 750 MHz and 870 MHz FlexNet
to 1002 MHz Flex Max901e amplifiers. Refer to Return Switch Installation on page 7-4, for
instructions on installing return switches in an amplifier that was purchased without return switches.
Upgrade Considerations — page 3-2
Tools Required — page 3-3
Housing Opening — page 3-4
RF Module Upgrade — page 3-5
1502154 Rev D
Note C-COR 700, 800, and 900 series amplifiers can be upgraded to the
Flex Max901e. The Flex Max901e module can be placed in existing 700, 800, and 900
series locations without the need for respacing.
C H A P T E R
Upgrading Legacy FlexNet Amplifiers
3
®
trunks and bridgers
3-1