C-COR Flex Max901e Equipment Manual page 108

Option
Spacing (dB)
A
Bandwidth (MHz)
Factory
Equalization
(dB @ HF)
Frequency Split
(MHz)
Transfer
Linearization
ALC Operation
(NTSC/QAM)
Frequency Control
(MHz)
Return (dB)
Output
Configuration
Powering
Power Passing
Housing
Housing Finish
Testpoint Access
Testpoint Value
(dB)
Number of
Forward
Testpoints
Number of Return
Testpoints
1. For 750 and 862MHz applications, the standard 1 GHz FMB amplifier can be used with the appropriate SEQ-750 or SEQ-862 plug-ins.
2. The frequency dependent assemblies are bench replaceable to upgrade frequency split of amplifier at a later date if required.
3. GaAs hybrids provide TL performance at TL operating levels.
4. ALC may operate on a QAM channel. This depends on the level of the QAM signals. Not recommended.
5. The ALC PAD can be adjusted to compensate for the lower QAM signal.
6. The 700 series used a 9-pin power supply cable, but a conversion kit is available to convert to the 12-pin FM901e module.
7. The balance testpoint is internal only.
8. Only Forward testpoints could be either Internal or External type. Return testpoints are always Internal type.
9. Bi-directional Port testpoints. Balance testpoint is directional coupler type.
10. Separate Forward and Return directional coupler testpoints.
11. Combined directional coupler Forward and Return testpoints.
A-6 Flex Max901e 1GHz Trunk and Bridger Amplifiers
Table A.6 FlexNet/Flex Max Bridger Model Options Comparison
700 Series 800 Series
38 (550 MHz) 37 (750 MHz)
37 (750 MHz) 38 (862 MHz)
550 750
750 862
11 (750 MHz) 11 (750 MHz)
11 (550 MHz) 12 (862 MHz)
42/54 42/54
40/54 40/54
55/70
No No
4
NTSC Only NTSC Only
Manual Manual
439.25 439.25
499.25 499.25
451.25
Passive Passive
14.5 18
18.5
2 O/P (Fixed) 4 O/P (User Config)
4 O/P (User Config)
None None
6
90 Volt HE P/S (1.8 A) 90 Volt HE P/S
6
90 Volt HE P/S (2.3 A)
13 A (all Ports) 15 A (P1, P3 & P6)
13 A (P2 & P5)
None None
6-Port (STD) 6-Port (STD)
6-PT 90º Access 6-PT 90º Access
Standard Standard
Corrosion Protection Corrosion Protection
7
External Only External Only
-25 -20
-25
9
5 (Ports) 5 (Ports)9
1 (Balance) 1 (Balance)
9
5 (Ports only)9 5 (Ports)
1 (Balance)
900 Series
37 (750 MHz)
38 (862 MHz)
40 (862 MHz)
750
862
11 (750 MHz)
17 (750 MHz)
18 (862 MHz)
42/54
40/54
55/70
65/80
Yes
4 4
NTSC Only
439.25
499.25 451.25
495.25
18
2 O/P (Fixed)
4 O/P (User Config)
None
90 Volt HE P/S
15 A (P1, P3 & P6)
13 A (P2 & P5)
None
4-Port (ITP)
4-Port (ETP)
6-Port (ITP)
6-Port (ETP)
4-Port 90º (ITP)
4-Port 90º (ETP)
Standard
Corrosion Protection
7 8
Internal
8
External
-20
-25
10
3 (P1, P2/P3, P5/P6)
10
3 (P1, P2/P3, P5/P6)
9
901 Series 901e Series
43 43
1
1002 1002
23 (1002 MHz) 23 (1002 MHz)
2 2
42/54 42/54
2
65/80
2
55/70
3 3
No No
5
NTSC & QAM NTSC & QAM
439.25 423.25
427.25
499.25
439.25
451.25
471.25
18 18
4 O/P (User Config) 4 O/P (User Config)
None None
90 Volt HE P/S 90 Volt HE P/S
15 A (P1, P3 & P6) 15 A (P1, P3, P4 & P6)
13 A (P2 & P5) 13 A (P2 & P5)
None None
6-Port (ITP) 6-Port (ITP)
6-Port (ETP) 6-Port (ETP)
6-Port 90º (ITP) 6-Port 90º (ITP)
6-Port 90º (ETP) 6-Port 90º (ETP)
6-Port Bypass (ETP) 6-Port Bypass (ETP)
Standard Standard
Corrosion Protection Corrosion Protection
8 8
Internal Internal
8 8
External External
-20 -20
-25
11
3 (P1, P2/P3, P5/P6) 3 (P1, P2/P3, P5/P6)
11
3 (P1, P2/P3, P5/P6) 3 (P1, P2/P3, P5/P6)
1502154 Rev D
5
495.25
499.25
609.00
645.00
711.00
11
11