C-COR Flex Max901e Equipment Manual page 122

Table B.4 Flex Max901e Trunk Amplifier, 1002MHz, 55/70 Split, 33dB Spaced, Different Tilt on Trunk
B
B-12 Flex Max901e 1GHz Trunk and Bridger Amplifiers
Powering Requirements, Max./Typ.
AC Voltage, 60Hz
AC Power, Watts
AC Current, mA
DC Current, mA @ 24V ± 0.5V
Level Control
Range, dB @ 1002MHz
Accuracy (–40 to 60°C)
18
Output Level Range (from nominal)
19
Pilot Frequency Band (recommended)
Gain Control
Plug-in PAD
Equalization to Compensate for Cable Loss
Plug-in Equalizers for Additional Equalization
Chrominance/Luminance Delay, Max.
Channel 5, ns/3.58MHz
Channel 6, ns/3.58MHz
Return Group Delay, Max.
5.5–7MHz, ns
10–11.5MHz, ns
52–53.5MHz, ns
53.5–55MHz, ns
70–71.5MHz, ns
71.5–73MHz, ns
Hum Modulation (Time Domain @ 15A)
5–10MHz, –dBc
11–750MHZ, –dBc
751–1002MHz, –dBc
1. Spacing at highest frequency with SEQ–1G–XX installed. Return spacing includes losses due to housing, diplex
filters, and MEQ–55–X.
2. The specifications are based on the amplifier configured (with two SPB–0) as a 2–output bridger with distribution
outputs on Ports 3 and 6. When using distribution plug-ins SS–1000–2, SDC–1000–8 or SDC–1000–12, levels
should be derated accordingly based on the accessory specifications.
3. NTSC video channels occupying the appropriate frequency spectrum per specified number of channels.
4. Recommended minimum forward input levels at 1002MHz including loss due to equalizer.
5. Recommended maximum return output level at 55MHz including loss due to equalizer.
6. Bridger output: At specified operational tilt the maximum output level for 870MHz or 1002GHz loading is
56.5dBmV @ HF.
7. Distortion performance is derated accordingly to take into account the influence of the digitally compressed
channels operating at levels 6dB below equivalent video channels.
8. Cross modulation specification number indicates typical cascade performance.
9. Systems operating with digitally compressed channels or equivalent broadband noise from 550 to 1002MHz at
levels 6dB below equivalent video channels will experience a composite distortion (CIN) appearing in the 70 to 550
frequency spectrum.
and Bridger (cont'd)
FORWARD
Trunk
17
+4/–5dB
±0.5dB
+5/–3dB
499.25MHz (Single Channel)
NPB–XXX
SEQ–1G–XX
14
9
—
—
—
—
21
15
—
60
55
Specification Document Number 1502466 Rev B
RETURN
2 O/P Bridger Trunk & 2 O/P Bridger
With Active Return
@ 90V
53.5/49
735/700
1955/1775
—
—
—
—
NPB–XXX
MEQ–55–XX
—
—
52
7
21
36
—
—
55
60
—
1502154 Rev D
@ 60V
53/48
970/880
1955/1775