Installing The Pcie Riser Assembly; Removing The Air Director - Inspur NF5260FM6 User Manual

Figure 4-3 Removing the PCIe riser assembly

Installing the PCIe Riser Assembly

1. Power off the server.
2. Pull the server out of the rack.
3. Remove the server top cover.
4. Install the PCIe riser assembly.
5. Install the server top cover.
6. Install the server into the rack.
7. Power on the server.

Removing the Air Director

For proper cooling, do not run the server without the top cover, air directors, or
fans installed. If the server supports hot-swap of components, avoid frequently
opening the top cover of the server.
1. Power off the server.
2. Remove the server from the rack.
3. Remove the server top cover.
4. Remove the air director.
23