Installing The Server Top Cover; Removing The Pcie Riser Assembly - Inspur NF5260FM6 User Manual

Figure 4-2 Removing the server top cover

Installing the Server Top Cover

1. Open the cover locker, align the server top cover with the server installation
slot and lower it vertically.
2. Slide the server top cover into the closed position and snap the cover locker
downward.
3. Use a screwdriver to tighten the safety screws on the cover locker.

Removing the PCIe Riser Assembly

To avoid damage to the server or expansion card, power off the server and
remove all AC power plugs before removing or installing the PCIe riser assembly.
1. Power off the server.
2. Pull the server out of the rack.
3. Remove the server top cover.
4. Remove the PCIe riser assembly.
22