Inspur NF5260FM6 User Manual page 12

b. Allow the product to cool down before removing the chassis cover or
touching inner components.
c. Discharge static electricity from your body by touching a grounded metal
object before installing, removing, or touching any electronic components
inside the device.
d. Install and remove components gently to avoid damaging the components
or scratching your arm.
e. Handle all the components and cards with care and do not touch the
components or contacts on the cards. Remove a card or component by
holding its edge or metal bracket.
8. When installing and using the cabinet:
a. After installing the cabinet, make sure the leveling legs are secured to the
rack and down to the floor, and that weight of the entire rack is transferred
to the floor.
b. Be sure to load the cabinet from bottom to top and install the heaviest
component first.
c. Always pull out a component from the cabinet gently to keep the cabinet
balanced and stable.
d. Be careful not to jam your fingers when pushing in the slide-rail to release
the latch and sliding the component in or out.
e. Do not overload the AC power supply branch circuit of the cabinet. The
total load of the cabinet should not exceed 80% of the rating of a branch
circuit.
f. Ensure the components in the cabinet are properly ventilated.
g. Do not step on other components when repairing a component in the
cabinet.
4