Text Programming; Misc Button Typing; The Internal Tag Reader; The External Proximity Reader - Pyronix ENFORCER V11 Programming Manual

Text programming

On the system it is possible to label items such as the following:
• Zones – Two labels; zone name and location
• Area names
• Site name
• Keypad/reader – Two labels; keypad description and location
• Zone and output expander location descriptions
• User names
The control panel incorporates a predictive text feature, and works like so:
Enter 'B' and 'Bedroom' will be displayed. If the word that is required does not appear, then type the word letter by
letter.
Hint: To type a word, press the relevant button the appropriate number of times – e.g. for the letter 'k' press 5 two times, or for the letter 's' press 7
four times. For punctuation marks, press the 1 button multiple times until the desired character is shown.

Misc button typing

The internal tag reader

The Internal tag reader can be used for arming/disarming, entry control or access control. Refer to the installation
manual for all connections.

The external proximity reader

The external proximity reader can be used for arming/disarming, entry control or access control. Refer to the
installation manual for all connections.
Please note: The system will arm depending on the type of exit mode programmed (final door, timed or
push to set)
10
BUTTON
a
b
c
d
[ ]
Tag area
(where a proximity tag/card must be presented to arm/disarm)
Blue LED
Alert
Amber LED
Alarm
Red LED
Tamper
Red LED
Fault
Amber LED
Disarmed
Green LED
To arm/disarm the system using the external proximity reader, present a pre-
programmed tag to the centre of the unit.
The unit will display the system status:
• Green indicates the system is disarmed.
• Red indicates the system is armed.
Present the tag again within 10 seconds to arm or disarm the system.
ENFORCER V11 PROGRAMMING GUIDE
TEXT FUNCTION
Toggles between upper and lower case characters
Moves cursor left
Clears letters / adds a space
Moves cursor right
Moves the cursor left and right