Delete Devices; Control Keypad/Speaker - Pyronix ENFORCER V11 Programming Manual

Delete devices

Already learnt sirens may be deleted by entering this menu.
Delete all
To delete all wireless bells enter '2000' . 'Please wait' will be displayed while the system deletes them.
Select bell to delete
This option deletes only a specific wireless bell that is learnt. Any bell that displays 'learnt' can be deleted. 'Please
wait' will be displayed while the system deletes the wireless bell. Return to this process to delete more devices.

Control Keypad/Speaker?

Wireless Arming Station functions are programmed in the 'ASSIGN KEYPADS/READERS?' menu and are mapped
as:
Kpd/Spk #1 : Address [4]
Kpd/Spk #3 : Address [6]
For the wireless arming station options, please see
Learn devices?
Entering this menu allows the learning of wireless arming stations onto the system.
Select keypad / speaker
Selects the arming station on the system that is to be learnt. 'Learnt' will be displayed if an arming station is
already learnt, or 'Available' will be displayed if not.
Select keypad / speaker  Learning...
Open the wireless arming station.
Plug the battery connector into the battery terminal.
If a device is not learned, the
Press and hold the 'LEARN' button on the device and all three LEDs will start cycling BLUE,
Release the 'LEARN' button. If successful, 'Arming Station Learnt' will be displayed and a confirmation tone on
the panel will be emitted. If an Arming Station has already been learnt, 'Arming Station learnt already' will be
displayed.
Please note: For speaker/sounder unit learning instructions, please refer to the document provided with
the unit.
Delete Devices
Arming Stations and speaker/sounders that have already been learnt, may be deleted by entering this menu.
Delete all
To delete all wireless arming stations enter '2000' (this is the system security code). 'Please wait' will be displayed
while the system deletes them.
Select keypad / speaker to delete
This option deletes only a specific wireless arming station or speaker/sounder that is learnt. Any addresses that
display 'learnt' can be deleted. 'Please wait' will be displayed while the system deletes the device. Return to this
process to delete more devices.
14
Kpd/Spk #2 : Address [5]
Kpd/Spk #4 : Address [7]
"Keypad / Speaker Options" on page
GREEN and RED LEDs on the device will flash (alternating).
ENFORCER V11 PROGRAMMING GUIDE
23.
GREEN and RED.