The Setup Menu - Eclipse EGO User Manual

The Set Up Menu
To activate the
the right hand side of the frame
grip to expose the PCB inside the frame. Press and hold the
pushbutton, which is located on the PCB above the battery
FIGURE 4.4
After one second, the
SET-UP
on the
FIGURE 4.6
Lower
Press the
the menu. Once the last item has been displayed, pressing the
pushbutton will cause the first item to be displayed.
FIGURE 4.5
Raise
Press the
menu. Once the first item has been displayed, pressing the
will cause the last item to be displayed.
Select
Press the
BACK
Selecting
Menu was selected.
SET-UP
Menu, first remove the three rubber grip screws from
(See Figure 4.4)
MODE
parameter will be displayed - this is the first item
(See Figure 4.6)
Menu
pushbutton to scroll down through each of the items on
pushbutton to scroll up through each of the items on the
pushbutton to select the displayed item.
will return the display to the display from which the
and peel back the rubber
Set-up
(See Figure 4.5)
.
Lower
Raise
pushbutton
SET-UP
29