Eclipse EGO User Manual page 45

FIGURE 6.24
FIGURE 6.25
Insert the silver coloured spring into
the LPR cap, so that it
rests neatly in the adjuster piston
(See Figure 6.24)
.
Place the gold coloured spring onto
the LPR piston and insert piston
and spring into the LPR cap,
(See Figure 6.25)
o-ring end first .
Before screwing the LPR cap back
onto your Eclipse Ego, use a dry Q-
tip to clean the seal inside the LPR
(See Figure 6.26)
body . Lubricate this
seal using a light 3 in 1 oil.
Replace the LPR cap by screwing
it onto the LPR body in the Eclipse
(See Figure 6.27)
Ego .
FIGURE 6.27
45
FIGURE 6.26